S&S Urethane & Ceramics - Epoxy/Wearing Compound
Urethane
Ceramic Tile
Cement Lining
Plastics
Mobilization
S&S Urethane & Ceramics markets our own label of tile epoxy, adhesives and wearing compounds. Our many years of experience in tile installation have allowed us the opportunity to determine the best performing adhesives and wearing compounds for different applications in the coal preparation and power generation industries. The materials that we use to install ceramic are all available for purchase in a variety of product specifications.

Contact Us
Industrial Ceramic Tile | Engineered Ceramic Tile | Eproxy/Wearing Compound

Epoxy/Wearing Compound

S&S 2 Tile Epoxy
The standard in tile installation applications
Hydro-ester trowel grade is a 100% solids, moisture insensitive epoxy system.
Simple 1 to 1 mix ratio / 8 Hour Cure
Bond Strength: 2500 psi
Heat Resistance (FE2 400 Degrees F / DE2 200 Degrees F)
Typical applications include bonding ceramic tiles to prepared steel substrates
(FE2 to horizontal surfaces / DE2 to vertical or overhead surfaces)

S&S 5 Tile Adhesive
Double the adhesive strength of other epoxies
Semi-flexible, medium cure, high viscosity adhesive.
10 to 1 mix ratio / 2 Hour Cure
Bond Strength: 4800 psi
Typical applications include bonding ceramic tiles to prepared or
unprepared steel substrates.

S&S 537 Fast Set Tile Epoxy
Rapid setting for emergency repairs
A moisture-sensitive, rapid setting 2 component epoxy system.
Simple 1 to 1 mix ratio / 1 Hour Cure
Bond Strength: 3000 psi
Typical applications include bonding ceramic tiles to prepared steel
substrates in emergency repair situations.

All of the above Tile Adhesives / Epoxies can be ordered as ceramic-filled Wearing
Compounds by adding suffix at the end of the product name as follows:

B Standard Ceramic Beads
LB Large Ceramic Beads
XFB Extra Fine Ceramic Beads
C Ceramic Chips
D Ceramic Dust

S&S Urethane & Ceramics is also a proud user and distributor of Devcon Wearing Compounds and products.